Materials used

We make boats from scratch. Especially for them, we have developed our own material based on natural rubber, which guarantees that the boats will last. They are resistant to abrasion, aging and sunlight.

NITRILON® + DROP-STITCH

Material composition: outer coating based on synthetic rubber (1), anchoring layer (2), high-strength PES fabric (1,100 dTex) (3), anchoring layer (4), coating based on natural and synthetic rubber (5), coating on natural and synthetic rubber base (6), anchor layer (7), top layer of drop-stitch fabric (8), distance fibers of drop-stitch fabric (9). Minimum tensile strength 3,600/3,100 N (sample 20 × 5 cm). Minimum weight 1,270g/m2.

NITRILON®

Material composition: high-strength PES fabric (1) with an outer layer of synthetic rubber (2) and an inner layer of a mixture based on natural rubber (3). The material is highly resistant to abrasion, aging and UV. Minimum tensile strength 3,000/3,000 N (sample 20 × 5cm). Minimum weight 920g/m2.

NITRILON® oboustranný

Material composition: high-strength PES fabric (1) with synthetic rubber coating on both sides (2). The material is highly resistant to abrasion, aging and UV. Minimum tensile strength 3,000/3,000 N (sample 20 × 5cm). Minimum weight 1,192g/m2.

NITRILON® EXTRA

Material composition: high-strength PES fabric (1) with an inner layer of synthetic rubber (2) and an outer layer of NITRILON® EXTRA (3). The highest quality material for maximum load in professional use and for use in demanding climatic conditions. Minimum tensile strength 3,000/3,000 N (sample 20 × 5cm). Minimum weight 1487g/m2.

PES-PUR

 

Material composition: RIPSTOP PES fabric (1) with internal polyurethane coating (2) and Teflon treatment (3) against water wetting. The material is resistant to abrasion, aging and UV radiation. Minimum tensile strength 1100/900 N (sample 20 × 5 cm).